Keine Beschreibung http://j1x-huginn.herokuapp.com

devise.rb 12KB

    # Use this hook to configure devise mailer, warden hooks and so forth. # Many of these configuration options can be set straight in your model. Devise.setup do |config| # ==> Mailer Configuration # Configure the e-mail address which will be shown in Devise::Mailer, # note that it will be overwritten if you use your own mailer class # with default "from" parameter. config.mailer_sender = "please-change-me-at-config-initializers-devise@example.com" # Configure the class responsible to send e-mails. # config.mailer = "Devise::Mailer" # ==> ORM configuration # Load and configure the ORM. Supports :active_record (default) and # :mongoid (bson_ext recommended) by default. Other ORMs may be # available as additional gems. require 'devise/orm/active_record' # ==> Configuration for any authentication mechanism # Configure which keys are used when authenticating a user. The default is # just :email. You can configure it to use [:username, :subdomain], so for # authenticating a user, both parameters are required. Remember that those # parameters are used only when authenticating and not when retrieving from # session. If you need permissions, you should implement that in a before filter. # You can also supply a hash where the value is a boolean determining whether # or not authentication should be aborted when the value is not present. config.authentication_keys = [ :login ] # Configure parameters from the request object used for authentication. Each entry # given should be a request method and it will automatically be passed to the # find_for_authentication method and considered in your model lookup. For instance, # if you set :request_keys to [:subdomain], :subdomain will be used on authentication. # The same considerations mentioned for authentication_keys also apply to request_keys. # config.request_keys = [] # Configure which authentication keys should be case-insensitive. # These keys will be downcased upon creating or modifying a user and when used # to authenticate or find a user. Default is :email. config.case_insensitive_keys = [ :email ] # Configure which authentication keys should have whitespace stripped. # These keys will have whitespace before and after removed upon creating or # modifying a user and when used to authenticate or find a user. Default is :email. config.strip_whitespace_keys = [ :email ] # Tell if authentication through request.params is enabled. True by default. # It can be set to an array that will enable params authentication only for the # given strategies, for example, `config.params_authenticatable = [:database]` will # enable it only for database (email + password) authentication. # config.params_authenticatable = true # Tell if authentication through HTTP Basic Auth is enabled. False by default. # It can be set to an array that will enable http authentication only for the # given strategies, for example, `config.http_authenticatable = [:token]` will # enable it only for token authentication. # config.http_authenticatable = false # If http headers should be returned for AJAX requests. True by default. # config.http_authenticatable_on_xhr = true # The realm used in Http Basic Authentication. "Application" by default. # config.http_authentication_realm = "Application" # It will change confirmation, password recovery and other workflows # to behave the same regardless if the e-mail provided was right or wrong. # Does not affect registerable. # config.paranoid = true # By default Devise will store the user in session. You can skip storage for # :http_auth and :token_auth by adding those symbols to the array below. # Notice that if you are skipping storage for all authentication paths, you # may want to disable generating routes to Devise's sessions controller by # passing :skip => :sessions to `devise_for` in your config/routes.rb config.skip_session_storage = [:http_auth] # By default, Devise cleans up the CSRF token on authentication to # avoid CSRF token fixation attacks. This means that, when using AJAX # requests for sign in and sign up, you need to get a new CSRF token # from the server. You can disable this option at your own risk. # config.clean_up_csrf_token_on_authentication = true # ==> Configuration for :database_authenticatable # For bcrypt, this is the cost for hashing the password and defaults to 10. If # using other encryptors, it sets how many times you want the password re-encrypted. # # Limiting the stretches to just one in testing will increase the performance of # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use # a value less than 10 in other environments. config.stretches = Rails.env.test? ? 1 : 10 # Setup a pepper to generate the encrypted password. # config.pepper = "SOME LONG HASH GENERATED WITH rake secret" # ==> Configuration for :confirmable # A period that the user is allowed to access the website even without # confirming his account. For instance, if set to 2.days, the user will be # able to access the website for two days without confirming his account, # access will be blocked just in the third day. Default is 0.days, meaning # the user cannot access the website without confirming his account. # config.allow_unconfirmed_access_for = 2.days # If true, requires any email changes to be confirmed (exactly the same way as # initial account confirmation) to be applied. Requires additional unconfirmed_email # db field (see migrations). Until confirmed new email is stored in # unconfirmed email column, and copied to email column on successful confirmation. config.reconfirmable = true # Defines which key will be used when confirming an account config.confirmation_keys = [ :login ] # ==> Configuration for :rememberable # The time the user will be remembered without asking for credentials again. config.remember_for = 4.weeks # If true, extends the user's remember period when remembered via cookie. # config.extend_remember_period = false # Options to be passed to the created cookie. For instance, you can set # :secure => true in order to force SSL only cookies. if Rails.env.production? config.rememberable_options = { :secure => true } else config.rememberable_options = { } end # ==> Configuration for :validatable # Range for password length. Default is 6..128. # config.password_length = 6..128 # Email regex used to validate email formats. It simply asserts that # an one (and only one) @ exists in the given string. This is mainly # to give user feedback and not to assert the e-mail validity. # config.email_regexp = /\A[^@]+@[^@]+\z/ # ==> Configuration for :timeoutable # The time you want to timeout the user session without activity. After this # time the user will be asked for credentials again. Default is 30 minutes. # config.timeout_in = 30.minutes # If true, expires auth token on session timeout. # config.expire_auth_token_on_timeout = false # ==> Configuration for :lockable # Defines which strategy will be used to lock an account. # :failed_attempts = Locks an account after a number of failed attempts to sign in. # :none = No lock strategy. You should handle locking by yourself. config.lock_strategy = :failed_attempts # Defines which key will be used when locking and unlocking an account config.unlock_keys = [ :email ] # Defines which strategy will be used to unlock an account. # :email = Sends an unlock link to the user email # :time = Re-enables login after a certain amount of time (see :unlock_in below) # :both = Enables both strategies # :none = No unlock strategy. You should handle unlocking by yourself. config.unlock_strategy = :both # Number of authentication tries before locking an account if lock_strategy # is failed attempts. config.maximum_attempts = 10 # Time interval to unlock the account if :time is enabled as unlock_strategy. config.unlock_in = 1.hour # ==> Configuration for :recoverable # # Defines which key will be used when recovering the password for an account config.reset_password_keys = [ :login ] # Time interval you can reset your password with a reset password key. # Don't put a too small interval or your users won't have the time to # change their passwords. config.reset_password_within = 6.hours # ==> Configuration for :encryptable # Allow you to use another encryption algorithm besides bcrypt (default). You can use # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1, # :authlogic_sha512 (then you should set stretches above to 20 for default behavior) # and :restful_authentication_sha1 (then you should set stretches to 10, and copy # REST_AUTH_SITE_KEY to pepper) # config.encryptor = :sha512 # ==> Scopes configuration # Turn scoped views on. Before rendering "sessions/new", it will first check for # "users/sessions/new". It's turned off by default because it's slower if you # are using only default views. # config.scoped_views = false # Configure the default scope given to Warden. By default it's the first # devise role declared in your routes (usually :user). # config.default_scope = :user # Set this configuration to false if you want /users/sign_out to sign out # only the current scope. By default, Devise signs out all scopes. # config.sign_out_all_scopes = true # ==> Navigation configuration # Lists the formats that should be treated as navigational. Formats like # :html, should redirect to the sign in page when the user does not have # access, but formats like :xml or :json, should return 401. # # If you have any extra navigational formats, like :iphone or :mobile, you # should add them to the navigational formats lists. # # The "*/*" below is required to match Internet Explorer requests. # config.navigational_formats = ["*/*", :html] # The default HTTP method used to sign out a resource. Default is :delete. config.sign_out_via = :get # ==> OmniAuth # Add a new OmniAuth provider. Check the wiki for more information on setting # up on your models and hooks. # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo' if defined?(OmniAuth::Strategies::Twitter) && (key = ENV["TWITTER_OAUTH_KEY"]).present? && (secret = ENV["TWITTER_OAUTH_SECRET"]).present? config.omniauth :twitter, key, secret, authorize_params: {force_login: 'true', use_authorize: 'true'} end if defined?(OmniAuth::Strategies::Tumblr) && (key = ENV["TUMBLR_OAUTH_KEY"]).present? && (secret = ENV["TUMBLR_OAUTH_SECRET"]).present? config.omniauth :'tumblr', key, secret end if defined?(OmniAuth::Strategies::ThirtySevenSignals) && (key = ENV["THIRTY_SEVEN_SIGNALS_OAUTH_KEY"]).present? && (secret = ENV["THIRTY_SEVEN_SIGNALS_OAUTH_SECRET"]).present? config.omniauth :'37signals', key, secret end if defined?(OmniAuth::Strategies::GitHub) && (key = ENV["GITHUB_OAUTH_KEY"]).present? && (secret = ENV["GITHUB_OAUTH_SECRET"]).present? config.omniauth :github, key, secret end if defined?(OmniAuth::Strategies::Dropbox) && (key = ENV["DROPBOX_OAUTH_KEY"]).present? && (secret = ENV["DROPBOX_OAUTH_SECRET"]).present? config.omniauth :dropbox, key, secret end # ==> Warden configuration # If you want to use other strategies, that are not supported by Devise, or # change the failure app, you can configure them inside the config.warden block. # # config.warden do |manager| # manager.intercept_401 = false # manager.default_strategies(:scope => :user).unshift :some_external_strategy # end # ==> Mountable engine configurations # When using Devise inside an engine, let's call it `MyEngine`, and this engine # is mountable, there are some extra configurations to be taken into account. # The following options are available, assuming the engine is mounted as: # # mount MyEngine, at: "/my_engine" # # The router that invoked `devise_for`, in the example above, would be: # config.router_name = :my_engine # # When using omniauth, Devise cannot automatically set Omniauth path, # so you need to do it manually. For the users scope, it would be: # config.omniauth_path_prefix = "/my_engine/users/auth" config.omniauth_path_prefix = "/auth" end